Specifications * Frequency Range: 100KHz to 1GHz * Frequency Resolution: 1Hz * Output Accuracy: 1.5dB * Output Range: -140dBm to 13dBm * Programmable Interface: -148dBc/H * SSB Phase Noise Range: IEEE488 to -124dBc/H * Time Base Stability: 0.000002p
Key Points * RF & Sweep w/o Level Transient * Great ease of Operation * Modulation Gen w/8 fixed freq * Antenna Patterns * Overload capabilities * Intermodulation * Linearity of amplifiers * Shielding effectivness
Specifications
Frequency |
RongeSMG |
100kHz to 1000 MHz |
Resolution |
1Hz |
Setting time |
<15ms |
Frequency drift f |
<0.5*10-9+errorof reference |
Reference frequency |
standard |
OCXOoscillator |
Aging (after 30 daysof operation |
2*10-6/year |
<*10-9/day |
Temperature effect |
2.5*10-6/ |
0 to 50℃ |
<2*10-9/℃ |
Input/output for external/internal referencefrequency |
5 or 10 MHz,selectable |
Level |
Range |
-140to +13dBm(SMG,) |
Underrange and overrange withoutguarantee of specs |
-140 to +16dBm(SMG) |
|
|
Character isticimpedance |
50Ω |
VSWR |
<1.5for level≤0 dBm (SMG) |
Settingtime |
<25ms |
Non-interruptinglevel setting |
0 to 20 dB |
Overloadprotection(maximum permissibleRF power) |
50W |
Spectral purity |
Spurioussignals |
Harmonicw |
<-30 dBc(SMGL:≤27dBm) |
Subharmonics SMG |
none |
Resieual AM ,rms(0.03 to 20MHz) |
<0.02% |
Nonharmonic spurious signals at >5 kHzfrom carrier |
see line a in table below |
Residual FM,rms0.3 to 3 kHz(CCITT) |
seeline b in table below |
SSB phasenoise carier offset 20kHz 1Hz bandwidth,typical |
seeline c in table below |
f< |
31.25 |
62.5 |
125 |
250 |
500 |
1000 |
2000 |
MHz |
a< |
-70 |
-80 |
-80 |
-80 |
-76 |
-70 |
-64 |
dBc |
b< |
2 |
1 |
1 |
1 |
2 |
4 |
8 |
Hz |
c |
-139 |
-148 |
-142 |
-136 |
-130 |
-124 |
-118 |
dBc |
Amplitude modulation |
Modes |
INT,EXTAC,EXT DC,two-tone |
Modulationdepth |
0 to 99% |
AM distortion at 1 kHz 0to 30AM |
<1% |
Modulationfrequency |
AM EXT AC(DC) |
10 Hz (DC) to 50 kHz |
AM INT |
40/150/300/400Hz/ 1/3/6/15kHz±3% |
AM INT with option SMG-B210 Hz to 100 kHz (SMG)Frequencymodulation |
Modes |
INT,EXT AC,EXTDC,two-tone |
f< |
31.25 |
62.5 |
125 |
250 |
500 |
1000 |
2000 |
MHz |
Max,dev. |
200 |
50 |
100 |
200 |
400 |
800 |
1600 |
kHz |
FM eistortion at 1 kHz and 50%of maximum deviation |
<0.5%(typ.0.%) |
Modulation frequency |
FMEXT AC(DC) |
10 Hz(DC) to 100kHz |
FMINT |
40/150/300/400Hz/1/3/6/15kHz±3% |
FM INT with option SMG-B2 |
10 Hz to 100 kHz |
Frequency irift with FM DC,carrier frequency offset whenswitching on FM DC for fcarrier ≥31.25 MHz |
1%of deviation +1*10^-6*fcarrier |
Phasemodulation |
Modulation |
INT,EXTAC,two-tone |
f< |
31.25 |
62.5 |
125 |
250 |
500 |
1000 |
2000 |
MHz |
Max,dev. |
20 |
5 |
10 |
20 |
40 |
80 |
160 |
rad |
Phase modulation distortion at 1kHz and 50% of max.deviation |
<0.5%(typ.0.1%) |
Modulation frequency |
фMEXT |
10 Hz to 10 kHz |
фM INT |
40/150/300/400/Hz/1/3/6kHz±3% |
фM INT with option SMG-B2 |
10Hz to 10 kHz |
Pulse modulation |
Mode |
external |
On/offration |
>70dB (TYP.>80 dB) |
Rise/fall tiome(10/90%) f>200MHz |
typ.20ns |
Pulse repetition frequency |
0 to 10 MHz |
Modulation signal |
TTLLevels |
AF Synthesizer(option SMG-B2) |
Frequnecy |
10 Hz to100 kHz |
Readout |
3 digits |
Frequency drift |
<4*10^5 |
Level error at 1kHz |
<3%(typ.0.03%) |
Phase-continuous frequency change,responsetime betwween setting command and frequency change |
<10ms |
RF sweep,AF sweep(AF sweep with option SMG-B2) |
digitalstart-stop sweepin discrete steps |
Modes |
automaticfollowing ramp function,single-shot,manual control via spinwheel,linear or logarithmic |
Sweep range |
user=selectable over entirefrequency range |
Step size |
user-seletable |
Time perstep |
10 ms to 10s |
X output(with option SMG-B3) |
Xoutput |
0 to 10v staircase ramp,max.1000 steps |
Remote control |
IEC625-1(IEEE488) |
Ordering information
Power Signal Generator |
SMG |
0801.0001.52 |
Options |
Reference Oscillator OCXO |
SMG-B1 |
0802.0005.02 |
AF Synthexizer |
SMG-B2 |
0802.0405.02 |
X Output |
SMG-B3 |
0801.9609.02 | |